Mechanical parameters of the QHF-LG series single hole screw quantitative filling machine:

1. Appearance dimensions: 700mm (L) x 440mm (W) x 1460mm (H).

2. Power supply: AC220V/1 Ω/50HZ.

3. Bucket volume: 20L, double-layer bucket heated with oil separation. 

4. Filling volume: 1-10ml.

5. Body material: Adopting stainless steel (SUS304) body design. 

6. The pump and barrel are independently heated, including a stirring motor and adjustable speed.

7. Servo motor control. SKST series parameters of double hole and double barrel filling machine

1. Appearance dimensions: 1100 * 877 * 1840mm

2. Total power: 6.8KW

3. Voltage: 380V/three-phase/50HZ

4. Working air source: ≥ 6kg/cm2 (must be dry air source)

5. Main frame material: SUS201, material of material bucket: SUS304

6. Filling method: using servo cylinder to drive piston for quantitative filling

7. Filling volume: 1-25ml

8. Filling accuracy: 1-10ml: ± 0.1ml, 10-25ml: ± 0.15ml

9. Capacity: 10-50pcs/min

10. Volume: 20L

11. Introduction to the performance characteristics of this machine

1) Using PLC programmable controller combined with human-machine interface to achieve automatic operation of equipment

2) Servo control for quantitative filling, improving filling accuracy

3) The filling amount can be adjusted between quantitative domain values based on different volumes of packaging materials

4) 2 sets of nozzles and pumps can be independently controlled

5) The pump can be equipped with a heating device to prevent raw material condensation from affecting the filling effect

6) Each heating unit can independently control the temperature, and if the temperature is lower than the set value during the production process, heating can be automatically started

7) Using fiber optic automatic induction filling to improve production efficiency